Broadheads

Grim Reaper Pro Series Micro Hybrid

• Micro Design for pin point accuracy at super high speeds
• Extreme penetration
• 100% Stainless steel
• 2 fixed blades and 2 mechanical
• 4 blade 3 pack

Grim Reaper Razor Tip Whitetail Special

• 100 grain 3 blade 2" cut
• Minit tip blade
• .035" thjick mechanical blades
• includes practice head
• 3 pack

Grim Reaper Pro Series Carni-Four

• 4 Blade Mechanical with Staggered Blade Technology
• Features Pro Tip and Snap Cut design
• The instant the two longer 1-1/2" blades make contact and compress the internal spring, the two shorter 1-1/4" blades open at the touch of a hair
• Linear Cut 2 3/4"
• 4 Broad Heads Per Pack

Grim Reaper Pro Series Crossbow Broadheads

• Designed for high speed crossbows
• field point accuarte at speeds over 400 fps to 100 yards
• Pro Tip
• 4/pack Mechanicals or 3 pack Micro Hybrids

Ramcat Diamondback Fixed-Blade 100 Gr

• Concave design reduces wind planning
• Fixed blade featuring a 1-1/16-inch cut diameter
• Firenock Aero Concentric Technology and Back-Cut Technology. Hits like a Ram, Cuts like a Cat!
• 100 Grain, 3-Pack
• Patented Airfoil System
• 100% Stainless Steel Construction
• Front & Rear Sharpened Blades

Ramcast Diamondback Fixed-Blade 125 Gr

• Concave design reduces wind planning
• Fixed blade featuring a 1-1/2” inch cut diameter, Firenock Aero Concentric Technology and Back-Cut Technology.
• 125 Grain, 3-Pack
• Patented Airfoil System
• 100% Stainless Steel Construction
• Front & Rear Sharpened Blades

Ramcat Single Bevel Grind Pivoting - 100 Gr

• Patented Airfoil System
• 100 Grain - 1” Inch Cut Diameter
• Single Bevel Grind
• 100% Stainless Steel Construction
• Front & Rear Sharpened Blades

Ramcat Hydroshock Pivoting 100 & 125 Gr

• 125 Grain - 1-1/2” Inch Cut Diameter
• 100 Grain - 1” Inch Cut Diameter
• 3 per pack
• PIVOTING BROADHEADS: Pivots as needed to keep arrow driving on impact, even when coming in contact with bone
• AIRFOIL AERODYNAMICS: Deep lobes on tip creates an airfoil that eliminates wind planning for field-point accuracy and better flight
• BACK CUT TECHNOLOGY: 0.032-inch, rear-sharpened, stainless steel blades are silent in flight and in the event of no pass-through continue to maximize devastation on both the front and rear of blades
• BLADE OVER SHAFT TECHNOLOGY: Blades are cantilevered over the arrow shaft and offset in the broad head body creating a powerful vortex cut and incredible aerodynamics

Slick Trick Assailant Hybrid

• Hybrid-style broadhead with a massive 2 5/8" total cutting surface
• Features the popular ViperTrick series field-proven chisel-style tip. The broadhead
• Features 1 3/4" expandable heads and a 7/8" fixed bleeder blade. 
• Assailant is designed to deliver precision field-point accuracy.
• Stainless steel construction

Slick Trick Raptortrick Mechanical

• WEIGHT: 100 GRAINS
• BLADES: .035" STEEL BLADES
• FERRULE: STAINLESS STEEL
• TIP: 4 EDGE, BONE SPLITTING
• BLADE LOCK: STAINLESS STEEL PIN
• TOTAL CUT: 1" + 1" = 2"

Slick Trick Pro Series Magnum (Stainless Steel)

• N100% stainless steel Pro Series of your favorite SlickTrick. 
• Stainless steel is corrosion resistant
• 100 or 125 grain available
• 1 1/8" cutting diameter

Slick Trick Pro Series Standard (Stainless Steel)

• N100% stainless steel Pro Series of your favorite SlickTrick. 
• Stainless steel is corrosion resistant
• 100 or 125 grain available
• 1" cutting diameter

Slick Trick Pro Series Vipertrick (Stainless Steel)

• N100% stainless steel Pro Series of your favorite SlickTrick. 
• Stainless steel is corrosion resistant
• 100 or 125 grain avilable
• 1 1/16" cutting diameter

Slick Trick Wickedtrick (Stainless Steel)

• N100% stainless steel Pro Series of your favorite SlickTrick. 
• Stainless steel is corrosion resistant
• 100 grain
• 1 1/4" cutting diameter

Slick Trick Standard

Available in 85, 100, 125 Grains. Total 2" Cutting diameter.

Slick Trick Magnum

Available in 100, 125 Grains. 2 1/4" cutting diameter.

Slick Trick Grizz Trick 2

Available in 100, 125 Grains. 2 1/2" Cutting diameter.

Thorn Crown 100 & 125 Grain Fixed Blade

“PUT THEM DOWN WITH THE CROWN!”

• Blades starting at the top at 5/8” followed by a 3/4”, followed by a 7/8” and having a 1” blade at the bottom.
• Crown with eight helix stacked cutting blades giving you 3.25” of cutting surface leaving devastating wound channels that open up and stay open!
• Rugged 70/75 aircraft aluminum frame topped by a solid titanium threaded tip and replaceable 0.040 thick 420 stainless steal blades.
• Includes:  3-pack of 100 Grain Crown Broadheads ♦ One Set of Replacement Blades ♦ A Tip Tool

Thorn 100 and 125 grain Expandable Broadhead

• Thorn Expandable Broadheads uses patented “hidden blade” technology
• Rip-Tip delivers bone-crushing penetration and deploys the hidden blades creating a huge 1 3/4" wound channel. 
• Includes: 3 Thorn Broadheads ♦ 6 Sheer Pins ♦ 1 Practice Clip
• *Thorn Broadheads will NOT fully deploy in Foam Target. Orange Sheer pins are used for Compound Bows and Black Sheer Pins are used for Crossbows
• *Thorn Broadheads with practice clip installed is recommended for foam targets . Other target material such as bag targets may cause damage to the clip due to the Rip Tip grabbing bag material violently.

RAGE Hypodermic Trypan NC

2-Blade Broadhead

100 Grain

Hybrid Hypodermic Tip

Machined Stainless Steel Ferrule

                                                            .035" Blades

                                                            2" Cutting Diameter

                                                            No Collar Blade Lock

                                                            Recommended Practice Head: Hypodermic 100 grain Practice Head (SKU: R39109)

                                                            3 per Package

RAGE Hypodermic 125

Aerodynamic one-piece steel ferrule. Tough Razor sharp .035" Stainless Steel Blades. Shock Collar ensures proper blade retention.

RAGE Hypodermic +P 2 Blade

Stainless Steel Hypodermic Ferrule 1.5" cutting diameter. 125 Grain. Extreme Series Shock Collar. Includes Practice Head

RAGE Chisel Tip 2 Blade SC 100 Grain

2" cutting diameter. Includes practice head. 100 grain 3 pack. Improved shock collar technology.

RAGE 3 Blade Chisel Tip 100 Grain

The Rage Chisel Tip is available in three versions. The 2-blade Rage Chisel Tip has a 2-inch cutting diameter and is available in both 100- and 125-grain weights. The 100-grain 3-blade has a 1.5-inch cutting diameter.

RAGE 2 Blade Xtreme 125

2.3" cut for devastating wound channels and massive hemorrhaging. Leading blade honed to surgical sharpness. Stainless Steel blades. Shock Collar. NOT RECOMMENDED FOR DRAW WEIGHTS UNDER 55LBS.

G5 Montec CS

• 100% Steel Tough
• One-Piece MIM Carbon Steel Construction
• Diamond Cut Sharpness With An Additional Honing Process to Maximize Blade Edge
• 3 Broadheads Per Pack
• 1 1/16" Cutting Diameter

G5 Montec

1" to 1-1/8 cutting diameter. Available in 85, 100, and 125 Grains. 100% STEEL TOUGH. One piece construction.

G5 Striker X

• 4 Ultra Sharp Lutz Blades
• 100 & 125 grain options
• 100% Steel Tough
• Machined Steel Ferrule
• Improved arrow flight
• 1.25" cutting diameter
• Anix Blade Locking System
• Crossbow version available

G5 Striker V2

• 100% Steel Tough
• Machined Steel Ferrule
• Improved arrow flight
• 1.25" cutting diameter
• Ultra Sharp Lutz Blades
• Anix Blade Locking System
• 100 & 125 grain options
• Crossbow version available

G5 Dead Meat

1-1/2 Cutting Diameter. Available in 100 and 125 grain. 100% Grade A steel. Easy to use snap lock. No Blade Pre-deployment. Replacement blades and collars. BMP Practice Point Included

Muzzy One

3-Blade Broadhead

Available in 100 grain

Cut-on-Contact Tip

1-Piece Machined Stainless Steel Ferrule

                                                                                                   .046" Thickness Blades

                                                                                                   1 1/8" Cutting Diameter

                                                                                                   Can be sharpened on a flat stone

                                                                                                   3 per pack

Muzzy 100

This 100 Grain 3 Blade Broadhead features a 1 3/16 inch cutting diameter, .020" blade thickness, and the Bad To The Bone Trocar Tip! 6 Pack.

Muzzy 125

This 125 Grain 3 Blade Broadhead features a 1 3/16 inch cutting diameter, .020" blade thickness, and the Bad To The Bone Trocar Tip! 6 Pack.

Muzzy MX-3 100 Grain

Pack of 3 Broadheads The MX-3 is a 100 Grain 3 Blade with a shorter profile, wider cut, and thicker blades than our standard 100 Grain 3 Blade Muzzy. Features 1 1/4 Cutting Diameter, .025" Thick Blades.

Muzzy MX-3 125 Grain

Pack of 3 Broadheads The 125 Grain MX-3 is a 3 Blade with a ultra short profile and thicker blades than our standard 125 Grain 3 Blade Muzzy. Features 1 3/16 Cutting Diameter, .025" Thick Blades.